Fermostock 6611 - 4 levels - 900x360x1800 mm (wxdxh)

The best racks for cold rooms, freezer rooms, (washing) kitchens, HACCP storage areas, among others!

These anodized aluminum racks from Fermostock have height-adjustable beams and are equipped with removable gray plastic shelves, which can be easily cleaned in any dishwasher. The rack has a high load capacity! It is HACCP-proof and possibly the best racking currently available on the market. It meets the strictest requirements for durability and strength and complies with all standards regarding hygiene and cleaning conditions (NF031). Thanks to the rounded corners and flat surfaces, FERMOSTOCK racks enjoy even the toughest quality mark: the NF food hygiene label issued by AFAQ-AFNOR CERTIFICATION on 01/10/1993 (test lab Cnerpac n° 06-A-644/645). In addition, FERMOSTOCK racks are also very attractively priced.

• Square tube profile 27 x 27 mm.

• Distance between mounting points: 150 mm.

• Bottom rung at 140 mm. from the floor

• Top rung at 10 mm. from the top

• Stainless steel bolts

• Plastic caps are provided at the top

• Plastic adjustable feet at the bottom

• Anodized aluminum

• Profile 12/10, 50x22 mm.

• Depth 360 mm.

• Depth 360 mm.

• Perforations: round, Ø 40 mm.

• Easily removable and dishwasher safe

• In this rack it is also possible to (partially) remove the shelves and hang various sizes of Gastronorm containers in them.

• 100% food-safe (corrosion-free) and equipped with removable shelves.

• Easy installation without tools

• Freestanding setup with accessibility on every side and in all corners

• Levels every 150 mm. adjustable

• Easy to move or removable and washable (hygiene)

• Modular construction (this allows optimal design of the available space)

• Heavy load capacity per floor / maximum load

• Numerous flexible and optimal configuration options (in I, L, T, U, E shapes, among others)

• cold stores and/or freezers down to -30°C

• commercial kitchens

• laboratories

• hospitals

• dry food storage areas

• dishwashing areas

• etc. etc.

The basic rack is constructed from a modular structure of 2 uprights and a selectable number of levels, consisting of cross beams and shelves. The uprights are provided with the necessary mounting holes into which conical hook-in supports (a Fermod patent) can be attached. These hook-in supports, which can be attached to the upright at various heights, are made of an extremely resistant alloy. The sleepers, which are available in various standard lengths, can then easily be pressed onto the hook-in girders. Finally, the maintenance-friendly plastic shelves will be placed between these sleepers. These are suitable for temperatures up to &ndash30°C.

The extension rack consists of one upright and a selectable number of levels. You can always connect 2 extension racks to a basic rack. To make extension connections at a 90° angle (L, U, E or T arrangement), aluminum corner connecting pieces are used that are slid over the cross beams of the base rack.

Thanks to the conical hook-in supports (patent), the racks can be assembled quickly, efficiently and without tools by a single person.

When mounting in a corner, the corner connections can be used, so that the corner remains open and there is no upright in the way. These special corner connections can withstand the same load as a post.